Surron Ultra Bee Footbrake Kit V3

Surron Ultra Bee Foot Brake V3

Install Steps

1. Put the bike on a stable stand.
2. If converting to foot only, remove the stock rear brake line from the handlebar master. Keep fluid off pads and rotor.
3. Bolt on the CNC left peg bracket. Mount the foot brake pedal and master cylinder.
4. Route the included brake hose along the frame to the rear caliper with smooth bends and good clearance from heat and moving parts.
5. Connect the hose to the caliper. Fill and bleed per the caliper and master specifications (click for bleeding video).
6. Confirm no air bubbles remain, then take her for a rip. Ride safe.